Maker Pro
Maker Pro

Connector naming convention

P

pawihte

Jan 1, 1970
0
What is a general term for a connector - any connector in common
use, male or female - that's fitted at the end of a cable, to
distinguish it from one that's mounted on a box or a pcb?
 
P

Phil Allison

Jan 1, 1970
0
"pawihte"
What is a general term for a connector - any connector in common use, male
or female - that's fitted at the end of a cable, to distinguish it from
one that's mounted on a box or a pcb?


** Line.

Line plug, line socket, line male, line female .... etc.



.... Phil
 
R

Rich Webb

Jan 1, 1970
0
What is a general term for a connector - any connector in common
use, male or female - that's fitted at the end of a cable, to
distinguish it from one that's mounted on a box or a pcb?

One convention is to refer to the connector on the receiving or "more
stationary" object as a receptacle and to the connector on the active or
"moving" object, i.e., on the end of the cable, as a plug.

So, the old IBM PC standard 9-pin serial port is a female receptacle and
the connecting cable has a male plug on the end. Common network wiring
uses modular receptacles on equipment and wall-plates with modular plugs
on the ends of the cables.
 
P

pawihte

Jan 1, 1970
0
pawihte said:
What is a general term for a connector - any connector in
common
use, male or female - that's fitted at the end of a cable, to
distinguish it from one that's mounted on a box or a pcb?

Thanks for the replies. But the different replies seem to
indicate that there's no single technical term for it.

One specific case was when a friend visiting a larger city (I'm
in a small town) called to ask if I needed anything. At that
time, I needed some 25-pin D-sub connectors for a cable. I told
him I wanted "cable types". He bought the correct type, but I
wondered if there was a standard term for it.
 
B

Bob Masta

Jan 1, 1970
0
Thanks for the replies. But the different replies seem to
indicate that there's no single technical term for it.

One specific case was when a friend visiting a larger city (I'm
in a small town) called to ask if I needed anything. At that
time, I needed some 25-pin D-sub connectors for a cable. I told
him I wanted "cable types". He bought the correct type, but I
wondered if there was a standard term for it.

The term I usually see for this is "mount", as in
"cable mount" or "chassis mount".

Best regards,


Bob Masta

DAQARTA v5.10
Data AcQuisition And Real-Time Analysis
www.daqarta.com
Scope, Spectrum, Spectrogram, Sound Level Meter
Frequency Counter, FREE Signal Generator
Pitch Track, Pitch-to-MIDI
DaqMusic - FREE MUSIC, Forever!
(Some assembly required)
Science (and fun!) with your sound card!
 
P

pawihte

Jan 1, 1970
0
Bob said:
The term I usually see for this is "mount", as in
"cable mount" or "chassis mount".

Best regards,


Bob Masta
I've seen "chassis mount" and "PCB mount" and used them myself,
but not "cable mount". Seems OK is there's no definitive
universal term.
 
Top