prettypatterns9
- Sep 27, 2022
- 1
- Joined
- Sep 27, 2022
- Messages
- 1
Let me start by saying this is for a silly game for Burning Man. I'm a software engineer but only just getting into electronics, so I apologize in advance for probably using incorrect terms.
I have 5 RF receiver devices (vibrators) and 5 RF remote controls. All are operating on 433mHz. I want each remote to control only one device. What is the easiest way for me to change the existing circuitry to accomplish this?
-Replace the LR433t2 oscillator with a different frequency oscillator? Or somehow modify the frequency quartz inside?
-Add/remove something in the circuit that would change the frequency?
-Somehow reprogram the signal that each remote sends?
^the remote control
^the receiving device (vibrator)
Like I said, I’m very new to this, so any info you can give me would help.
I have 5 RF receiver devices (vibrators) and 5 RF remote controls. All are operating on 433mHz. I want each remote to control only one device. What is the easiest way for me to change the existing circuitry to accomplish this?
-Replace the LR433t2 oscillator with a different frequency oscillator? Or somehow modify the frequency quartz inside?
-Add/remove something in the circuit that would change the frequency?
-Somehow reprogram the signal that each remote sends?
^the remote control
^the receiving device (vibrator)
Like I said, I’m very new to this, so any info you can give me would help.
