Maker Pro
Maker Pro

Controlling RF vibrators with individual remote controls

prettypatterns9

Sep 27, 2022
1
Joined
Sep 27, 2022
Messages
1
Let me start by saying this is for a silly game for Burning Man. I'm a software engineer but only just getting into electronics, so I apologize in advance for probably using incorrect terms.

I have 5 RF receiver devices (vibrators) and 5 RF remote controls. All are operating on 433mHz. I want each remote to control only one device. What is the easiest way for me to change the existing circuitry to accomplish this?
-Replace the LR433t2 oscillator with a different frequency oscillator? Or somehow modify the frequency quartz inside?
-Add/remove something in the circuit that would change the frequency?
-Somehow reprogram the signal that each remote sends?

411551DB-F50A-43CB-8486-705CFAFA508F.jpeg
^the remote control
4F2AF76B-AEFC-473C-86D3-B09F3B4E18C8.jpeg
^the receiving device (vibrator)

Like I said, I’m very new to this, so any info you can give me would help.
 
Top