I have the "new" version of the Mitsubishi Lossnay-ventilator VL-50 series - VL-50SR2-E (Remote Controller Model). It has the power modes of off-low-high. I want to control it using my smart home system (through Zigbee og Z-Wave). Anyone know how to do this?
Images of circuit boards from the manual: https://www.mitsubishi-les.info/database/servicemanual/files/U224_B_DB.pdf



I would think it could be done using the Fibaro Smart Implant?
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs.
https://manuals.fibaro.com/content/manuals/en/FGBS-222/FGBS-222-EN-T-v1.2.pdf
Images of circuit boards from the manual: https://www.mitsubishi-les.info/database/servicemanual/files/U224_B_DB.pdf



I would think it could be done using the Fibaro Smart Implant?
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs.
https://manuals.fibaro.com/content/manuals/en/FGBS-222/FGBS-222-EN-T-v1.2.pdf
