Maker Pro
Maker Pro

Convert 2 way switch/ splitter

Gruntlife99

Feb 9, 2014
4
Joined
Feb 9, 2014
Messages
4
Is it possible to convert a 2-way switch into a splitter?
 
Last edited:

davenn

Moderator
Sep 5, 2009
14,040
Joined
Sep 5, 2009
Messages
14,040
hi there
welcome to the forums :)

tell us more about what you are trying to achieve
with the little info you have given its really difficult to give a good answer

cheers
Dave
 

Gruntlife99

Feb 9, 2014
4
Joined
Feb 9, 2014
Messages
4
So I have 2 in 1 out hdmi switch and I need a 1 in 2 out splitter to use for xbox 360 on two tv's. Is there any way to reverse that switch to make it a splitter?

Thanks Dave.
 

davenn

Moderator
Sep 5, 2009
14,040
Joined
Sep 5, 2009
Messages
14,040
just to confirm.... you want to feed both TV's at the same time ?
that is ... see the same X-box pic on both TV's

if so ... its probably a bit more involved that just paralleling up the wires
it probably needs some sort of propper splitting and signal conditioning

Im not too up to play on HDMI signalling, others may be able to give more info :)

cheers
Dave
 

Gruntlife99

Feb 9, 2014
4
Joined
Feb 9, 2014
Messages
4
I read a lot into and everything I can up with was doing the splitting but all I could find I stores around here was a switch box and so I thought before I order online if there was a way to reverse it.

Thank you for replying though
 

davenn

Moderator
Sep 5, 2009
14,040
Joined
Sep 5, 2009
Messages
14,040
you didnt actually answer my question...
just to confirm.... you want to feed both TV's at the same time ?
that is ... see the same X-box pic on both TV's


Dave
 
Top