Maker Pro
Maker Pro

Convert ac to dc

  • Thread starter Victor MacQuarrie
  • Start date
V

Victor MacQuarrie

Jan 1, 1970
0
Thanks for the help guys, I really appreciate it.

Vic
 
C

cdd

Jan 1, 1970
0
Thanks for the help guys, I really appreciate it.

Vic

I would have thought the motor would run smoother if
a capacitor was used after the bridge rectifier-If for
some reason this is a silly thing to do please let
me know, but I have noticed increased heat without
this component in circuit and of course slower motor
rpm-I understand that this would charge the cap over
the rms voltage of the circuit's norm of 12.6 but running
a universal motor under these coniditions as long as
the cap is not to large would seem the better way to me?

cdd
 
J

jasen

Jan 1, 1970
0
I would have thought the motor would run smoother if
a capacitor was used after the bridge rectifier-

it will, it'll also boost the voltage making the motor run faster.
If for some reason this is a silly thing to do please let
me know, but I have noticed increased heat without
this component in circuit and of course slower motor
rpm

low voltage can do that to a heaily loaded motor

Bye.
Jasen
 
Top