Maker Pro
Maker Pro

Convert iPhone six wire to usb 4 wire

launchteam1

Dec 26, 2013
1
Joined
Dec 26, 2013
Messages
1
I have a solar charger for an iPhone 3 that has been damaged. Where the existing loom has six wires (white, yelow, blue, red, black and green) that go into the 30 pin plug that then goes into the iPhone to charge. I'm wanting to convert this 6 wire loom to a female 4 wire USB port. I can't find anything that will show me a pinout except for all 30 wires. The connector is so small that I can't tell which pins these 6 wires go to. Can anyone help me with this conversion?
 

Attachments

  • iPhone 3 chARGING CABLE.jpg
    iPhone 3 chARGING CABLE.jpg
    133.6 KB · Views: 1,494

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
GND, +5V, D-, and D+ are the 4 connections which go to a USB connector.

I suspect that the black and green wires are connected (test this) but I don't know what the EN line is for (enable?). Maybe you can leave it disconnected, maybe you need to do something with it??
 
Top