Maker Pro
Maker Pro

crt tv horizontal display problem

walid ahmed

Aug 12, 2017
9
Joined
Aug 12, 2017
Messages
9
The crt tv cant display horizontally. The HOT and yoke coils are ok.....when horizontal yoke coil connected then the tv dont turn on...when removed then it ONs.
 

davenn

Moderator
Sep 5, 2009
14,011
Joined
Sep 5, 2009
Messages
14,011
The crt tv cant display horizontally. The HOT and yoke coils are ok.....when horizontal yoke coil connected then the tv dont turn on...when removed then it ONs.

things like the make and model of TV would be really helpful if you want some one to help you

have you googled for service manual or at least a schematic ?
 

walid ahmed

Aug 12, 2017
9
Joined
Aug 12, 2017
Messages
9
i replaced with best HOT. and driver transistor also...but when horizontal yoke connected only then tv didnt turn on
 

walid ahmed

Aug 12, 2017
9
Joined
Aug 12, 2017
Messages
9
so the tv model will not do to identify the present pcb connected
 
Last edited:

kellys_eye

Jun 25, 2010
4,775
Joined
Jun 25, 2010
Messages
4,775
Without a schematic to reference to what do you expect us to advise? Or should we just guess? I can't find any reference to match the details you have already given. Unless you can show us a picture of the board or the diagram we're pretty much in the dark.

Have you checked the sync pulses to the board?
 

debe

Oct 15, 2011
276
Joined
Oct 15, 2011
Messages
276
I guess if you are using a PCB that wasn't meant for that deflection yoke then theres a mismatch, & it wont work
 

davenn

Moderator
Sep 5, 2009
14,011
Joined
Sep 5, 2009
Messages
14,011
thread closed

@walid ahmed when you are able to supply make and model of the TV you are working on
PM me and I will reopen the thread

There is no point in all of us playing 20 questions if you are not going to supply the needed info
 

walid ahmed

Aug 12, 2017
9
Joined
Aug 12, 2017
Messages
9
Ok dear...i failed to give u any info about the tv....close the thread and just tell if the horz shorted yoke can prevent the tv to turn on?
 

kellys_eye

Jun 25, 2010
4,775
Joined
Jun 25, 2010
Messages
4,775
If the horizontal yoke is shorted it will cause an overload of the power supply and shut the set down.
 

shrtrnd

Jan 15, 2010
3,826
Joined
Jan 15, 2010
Messages
3,826
If the filament at the neck of the picture tube lights-up, the picture tube is on.
The yoke is a separate circuit.
 

73's de Edd

Aug 21, 2015
3,365
Joined
Aug 21, 2015
Messages
3,365
Sir walid ahmed . . . . .

You say . . .
The crt tv cant display horizontally.

This pic below is showing a problem with the sets HORIZONTAL CIRCUITRY or the yoke
A quite rarely occurring condition . . . . .

TV+Linea+Vertical+Sin+Barrido+Horisontal.jpg

If you have the MUCH MORE COMMON problem, where the bright white line will be ACROSS the screen from left to right, instead of UP and DOWN, as is shown in my 1st picture.
THAT will be a VERTICAL problem.

Now which is it.?

Also, does the sound always remain on ?

You say . . .
The HOT and yoke coils are ok.....when horizontal yoke coil connected then the tv dont turn on...when removed then it ONs.

Are the hoz and yoke connections being SEPARATE . . . . two pin . . . . plug in connectors ?.


73's de Edd
 
Last edited by a moderator:
Top