Maker Pro
Maker Pro

CTEK MXS 3.8 repair

73's de Edd

Aug 21, 2015
3,653
Joined
Aug 21, 2015
Messages
3,653
Yep . . . . no voltage ( high millivolts) across R4 until FET gate receives drive pulses . . . and just for those short durations .
Back to you after I solve the double dot dithering problem on an APQ117 stealth radar . . . .
 

bushtech

Sep 13, 2016
1,025
Joined
Sep 13, 2016
Messages
1,025
Wow! Way above my pay grade and NSA clearance:rolleyes:
Impressed!
 

bushtech

Sep 13, 2016
1,025
Joined
Sep 13, 2016
Messages
1,025
Remeasured the voltage carefully on the gate of the 04N60C3 and it's in the high 80's mV
 

bushtech

Sep 13, 2016
1,025
Joined
Sep 13, 2016
Messages
1,025
@73's de Edd
I am trying to understand how this works.

Does a signal/voltage from pin 5 (Drv) on the NCP1271A go through the 2 transistors A6W and 2F and then go to the Gate of the 04N60C3?
I am reading 21mV DC on pin 5 (Drv) Do I need a higher voltage here?
 

bushtech

Sep 13, 2016
1,025
Joined
Sep 13, 2016
Messages
1,025
@73's de Edd

Been checking the complimentary (A6W & 2F) pair of transistors in situ
These are smd transistors in which I have assumed a pinout as follows:

c
b e Please tell me if this is wrong in which case all below is rubbish

2F transistor
Red probe on base:
b - c 1900
b - e 1950
Black probe on base:
b - c 600
b - e 600

A6W transistor:
Red probe on base:
b - c 600
b - e OL
Black probe on base:
b - c 750
b - e OL

o_O A6W fubar?

St Edd, I hope you have kicked the radar till the double dithering is a frightened whimper:)
 
Top