Custom PCB

[Chris W]

The other day I came across this custom PCB manufacture,
http://www.futurlec.com/PCBService.shtml
I never imagined you could have 1 or 2 PCBs made for such a low price.
Has anyone hear had any experience with them? Is there produce of good
quality?

--
Chris W

Gift Giving Made Easy
Get the gifts you want &
give the gifts they want
http://thewishzone.com

 

[Chris W]

The other day I came across this custom PCB manufacture,
http://www.futurlec.com/PCBService.shtml
I never imagined you could have 1 or 2 PCBs made for such a low
price. Has anyone hear had any experience with them? Is there
produce of good quality?

Oops, make that "product" not produce

--
Chris W

Gift Giving Made Easy
Get the gifts you want &
give the gifts they want
http://thewishzone.com

 

[Patrick T. Caezza]

The other day I came across this custom PCB manufacture,
http://www.futurlec.com/PCBService.shtml
I never imagined you could have 1 or 2 PCBs made for such a low price.
Has anyone hear had any experience with them? Is there produce of good
quality?

Having looked at their Technical Specifications, I wouldn't give them
any work.

Single or double sided boards only, no mutlilayer.
Minimum VIA size of 20mil with a 50 mil pad.

Better fab house out there with just as good of prices

 

[Robert Monsen]

Having looked at their Technical Specifications, I wouldn't give them
any work.

Single or double sided boards only, no mutlilayer.
Minimum VIA size of 20mil with a 50 mil pad.

Better fab house out there with just as good of prices

Where?

--
Regards,
Robert Monsen

"Your Highness, I have no need of this hypothesis."
- Pierre Laplace (1749-1827), to Napoleon,
on why his works on celestial mechanics make no mention of God.

 

[Oliver Hannaford-Day]

H,i

Where?

I use CustomPCB.com
The main reason is they are the only ones I know who do "panel's" of designs
for a fixed price, although they are only ss/dd, no multilayer and 8th track
12th gap which is a bit strange.

 

[Robert Monsen]

H,i




I use CustomPCB.com
The main reason is they are the only ones I know who do "panel's" of designs
for a fixed price, although they are only ss/dd, no multilayer and 8th track
12th gap which is a bit strange.

Thanks. Any others folks have used? I want to put up a website
containing a short list of the current crop of low cost internet pcb
prototypers, along with comparison pricing and specs. Thus, if you could
email me any suggestions with this regard, I'll add them, and then post
the url here later. I'll also credit you if you want, and put in any
comments.

my email is:

rc<surname as below>@comcast.net

just make the obvious substitution.

Thanks!

--
Regards,
Robert Monsen

"Your Highness, I have no need of this hypothesis."
- Pierre Laplace (1749-1827), to Napoleon,
on why his works on celestial mechanics make no mention of God.

 

[Thomas A. Horsley]

I found a bunch of them via a google search for "printed circuit board
prototype". I went with expresspcb.com because their "miniboard" service was
the cheapest of all the ones I compared them with before I got tired of
doing comparisons . The boards arrived and worked fine. You can see my
results at:

http://home.att.net/~Tom.Horsley/markII/markII.html#PC Board

Odds are that if I wanted something more complex than the "miniboard"
option, someone else would have had a better price.
--email: [email protected] icbm: Delray Beach, FL |
<URL:http://home.att.net/~Tom.Horsley> Free Software and Politics <<==+

 

[Blake]

Their price for a bare-bones PWB looks pretty good, but with the solder mask
and silk screen, the price looks about the same as other shops I deal with
that offer better specs.

I use E-Teknet.Com (4 PWBs for $99) and 4PCB.Com (3 PCBs for $99)regularly.
Many shops have similar rates for small quantitiy prototype orders.

 

[paologatto]

I used many times Olimex http://www.olimex.com/pcb/index.html with
great satisfaction. They are really inexpensive and fast and the
prototypes are good.

These are examples of PCBs made by them:

http://img228.exs.cx/img228/4364/olimex5hq.jpg

Bye,
Paolo

 

[fengjianqing]

Dear All,
I found you chat in the internet about the PCB price. we are the PCB
manufacture in China. We can afford you the best quality PCB and with low
price. This price will be really interesting for you and your friends.

If you want further informations just mail to me. Thanks in advance!

The price , for example, double-side, FR4 material, 2 OZ copper, is only
0.023US$ per cm*cm. But the price does not include the fee for transfer.

Best regards,

Feng [email protected]