Maker Pro
Maker Pro

DC/AC motor controller and DC motor

DC/ACmotordrive

Dec 17, 2009
2
Joined
Dec 17, 2009
Messages
2
I am new one,just come here and want to make friends with some one.

If you need any help about DC/AC motor controller or DC motor, you can feel free to contact with me. I am working for a factory about this products

My Skype is WilliamAshan



DC servo control system,
PWM brush DC motor drive(motor controller) (PWM series products have got European CE certification.),
SCR brush DC motor drive(motor controller),
Brushless DC motor drive(motor controller),
Control Assembly

ZYT Series PM DC Motor
ZYN Series Lanthanide PM DC Motor
SZD Series Lanthanide PM DC Motor
SW Series DC Brushless Motor
1.5-2.2KW High-power Low-voltage DC Series Motor
3-4KW High-power Low-voltage DC Series Motor
4.5-5KW High-power Low-voltage DC Series Motor
J-SZ(ZYT)PX PM DC Gear Motor
GK Series DC Gear Motor with Square Reducer
NMRV/NRY Series Worm and Gear Motor
 

ariekarp

Feb 3, 2010
6
Joined
Feb 3, 2010
Messages
6
Hi, I'd like your advise.
I want to build a DIY turntable, therefore I need a small quite motor which speed is controlled accurately to be constant and switchable between two speeds to obtain a record revolution of 33.3 and 45 RPM depending on the transmission ratio of course not determined yet. the motor needs to be very quite, no vibrations with an electronic controller. Any suggestions as for the type of motor and controller that is also cheap and can be obtained from ebay? If the controller can be built from components even better.
Thanks,
Arie
 

dasheek

Feb 14, 2010
5
Joined
Feb 14, 2010
Messages
5
Hi im mechanical engineering university student and i really need help to turn a steering wheel of a boat, pls can u help with going abt this.
I also need to know how to be able to start the boat wirelessly like from a laptop or something with a range of 500 metres, this is also of great importance if not more please can you help me.
 
Top