Maker Pro
Maker Pro

DC Voltage Reduction

Gautam

Feb 1, 2021
1
Joined
Feb 1, 2021
Messages
1
Hi,
I bought the circuit which converts AC 220V to DC 5V, Initially, it was providing 5V then after output becomes DC 10V due to this my circuit is not functioning. how to get constant DC 5V from the same circuit.?
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Junk. The one you have is defunct and probably not worth trying to repair it.
Buy a new one.

And please don't hijack an old thread (it's from 2012!). Create a new thread for your own questions.
 

andypandyplod

Sep 7, 2019
3
Joined
Sep 7, 2019
Messages
3
If you connect directly to the 12v battery the circuit will draw current from the battery even if the light is off,even if a diode is in series.This will drain the battery down.If the 12v is only available when the camcoder is switched on that will be OK
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
An please don't hijack an old thread (it's from 2012!). Create a new thread for your own questions.


I have moved your and 2 other posts to a new thread
 
Last edited:
Top