M
[email protected]
- Jan 1, 1970
- 0
I have a 12 volt dc 690 rpm permanent magnet motor that I'm wanting to
use as a wind generator. The problem is that when I spin the shaft at
15 to 20 mph it produces 30 to 45 dc volts. I would like to regulate
it down to a constant 14 volts or figure out how to convert it to ac
voltage . Any ideas
Thanks,
Mark
use as a wind generator. The problem is that when I spin the shaft at
15 to 20 mph it produces 30 to 45 dc volts. I would like to regulate
it down to a constant 14 volts or figure out how to convert it to ac
voltage . Any ideas
Thanks,
Mark