Maker Pro
Maker Pro

de-modulator

R

RANDY EINARSON

Jan 1, 1970
0
hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb

Randy
 
B

Baphomet

Jan 1, 1970
0
RANDY EINARSON said:
hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb

Randy

see alt.binaries.schematics.electron [Radio Demodulator]
 
P

Peter Bennett

Jan 1, 1970
0
hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb

Randy

I don't think it would be practical to use your old oscillator as part
of a receiver - but it might be useful to help test a receiver.

I suggest you go to a library, and look for books on amateur radio -
the "ARRL Radio Amateur's Handbook" will have lots of info for you.
 
D

Dbowey

Jan 1, 1970
0
Randy posted:
<< hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb >>

You could use it as a local oscillator if you construct a mixer, etc. Or you
could use it to build a direct conversion receiver for tuning up to 2MHz.

The ARRL Handbook can give you some good schematics and theory.

Don
 
W

Watson A.Name - Watt Sun, Dark Remover

Jan 1, 1970
0
RANDY EINARSON said:
hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb

Randy

see alt.binaries.schematics.electron [Radio Demodulator]

He meant see alt.binaries.schematics.electronICS


--
@@F@r@o@m@@O@r@a@n@g@e@@C@o@u@n@t@y@,@@C@a@l@,@@w@h@e@r@e@@
###Got a Question about ELECTRONICS? Check HERE First:###
http://users.pandora.be/educypedia/electronics/databank.htm
My email address is whitelisted. *All* email sent to it
goes directly to the trash unless you add NOSPAM in the
Subject: line with other stuff. alondra101 <at> hotmail.com
Don't be ripped off by the big book dealers. Go to the URL
that will give you a choice and save you money(up to half).
http://www.everybookstore.com You'll be glad you did!
Just when you thought you had all this figured out, the gov't
changed it: http://physics.nist.gov/cuu/Units/binary.html
@@t@h@e@@a@f@f@l@u@e@n@t@@m@e@e@t@@t@h@e@@E@f@f@l@u@e@n@t@@
 
B

Baphomet

Jan 1, 1970
0
Watson A.Name - Watt Sun said:
RANDY EINARSON said:
hi I have a old oscillator that I would like to turn into a receiver.
my question is does any body have a schematic or know were to get one and/or
old radio de-modulator?
my oscillator has a out put @ 600ohm's and a frequency between 2hz to 2mhz
my wish is to build a receiver in am, fm, ssb

Randy

see alt.binaries.schematics.electron [Radio Demodulator]

He meant see alt.binaries.schematics.electronICS

YIKES! What happened to the ICS?
 
Top