delicate soldering job

[Miles Golding]

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

 

[Lord Garth]

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

That is very tight...any chance of sending a photo to
alt.binaries,schematics.electronic?

 

[Miles Golding]

That is very tight...any chance of sending a photo to
alt.binaries,schematics.electronic?

Thanks for the reply LG. I'll do that in the next day or two.
MilesG

 

[R. Steve Walz]

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

 

[Ross Mac]

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

That doesn't sound that tough....If you can't handle it, I bet the guy down
at the local TV repair shop might do it for ya!...
Worth asking anyway