Maker Pro
Maker Pro

Denon UD-M30 power up problem.

G

Gary P

Jan 1, 1970
0
Can anyone offer me advice on the following fault please? I have a Denon
UD-M30 CD/ Radio receiver. When the mains is applied the On-Standby switch
seems to work OK in that it changes from red to green when pressed and
vice-versa. However, the display panel doesn't light up and no controls
work. A possible power supply fault maybe but any advice would be
appreciated. As a last resort does anyone have access to circuit diagram
etc.?

Many thanks.

Gary
 
Z

zero131

Jan 1, 1970
0
Gary said:
Can anyone offer me advice on the following fault please? I have
Denon
UD-M30 CD/ Radio receiver. When the mains is applied the On-Standb
switch
seems to work OK in that it changes from red to green when pressed and
vice-versa. However, the display panel doesn't light up and n
controls
work. A possible power supply fault maybe but any advice would be
appreciated. As a last resort does anyone have access to circui
diagram
etc.?

Many thanks.

Gary

Gary, did you by any chance get to the bottom of your problem?
have exactly the same one except mine happened after my UD-M3
overheated.

Thanks in advance

Wil
 
Top