Maker Pro
Maker Pro

Design review: Fully differential telescopic Operational amplifier.

Alex_Bam

Sep 28, 2020
25
Joined
Sep 28, 2020
Messages
25
Hello,
I used Behzad Razavi's book to design a fully differential telescopic op-amp [screenshot attached]. Then I follow the same steps to design my proposed opamp, but I am not getting the desired result. Can someone point out where I'm doing mistakes?
For your reference, I have attached hand calculation and simulation screenshots. Thanks
My design specifications are: Supply voltage: Vdd=5V, Output voltage swing: 5V, Power ≤ 5mW, Gain: 500, UnCox= 151uA/V2, UpCox: 26uA/V2, Vthn=0.84V, Vthp: |1V| .
 

Attachments

  • 281929774_701876834222192_5458246276227493370_n.jpg
    281929774_701876834222192_5458246276227493370_n.jpg
    573.5 KB · Views: 8
  • 280430573_739468390572758_7130383991969742855_n.jpg
    280430573_739468390572758_7130383991969742855_n.jpg
    721.7 KB · Views: 6
  • 281729871_5468488746529287_1731736550436357233_n.jpg
    281729871_5468488746529287_1731736550436357233_n.jpg
    411.5 KB · Views: 6
  • 4.JPG
    4.JPG
    223 KB · Views: 6
  • 5.JPG
    5.JPG
    131.4 KB · Views: 6

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
Hello I am interested in knowing what program you are using to simulate this? It looks like you are confident in your calculation so I am wondering why you can not fault find this. What is your background and what experience do you have. Thanks Adam
 
Top