Maker Pro
Maker Pro

desing. tailgate up/down automatic control

T_wolf100

Nov 13, 2018
3
Joined
Nov 13, 2018
Messages
3
i want to built a position sensor and control for a truck´s tailgate, this its a basic layaout.
any opinion or recommendation are welcome.
 

Attachments

  • Layaut03_02.png
    Layaut03_02.png
    9 KB · Views: 7

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Insufficient information:
- which of the switches are the sensors, which are the controls?
- What are the inputs to the flipflops (clock, set, reset, ...)?
- What are the outputs of the flipflops supposed to indicate or control?

A short description of how the tailgate control is supposed to work will help incredibly in analysing your 'circuit'.

Why use inverters after S1 and S2? tie the switches to GND instead and remove the inverters.
Add pull-Up or Pull-down Resistors (depending on the logic) to the gates that have switches at their inputs to avoid floating inputs.
 

T_wolf100

Nov 13, 2018
3
Joined
Nov 13, 2018
Messages
3
thanks for your observations. i´ll try to solve all.
this its the first part of the whole proyect the sensor and control circuit, the second part (next post) develop the power circuit.

here it´s a new basic layaout with all the info
posible and a truth table (table01) for a better perspective.

the FF are asincronous i want to remark the sensor used and the basic layaut, are my personal creation. i´ll post the way to built it. I work on the final layaut with resistor, capacitor, ect. PD: short description it´s coming on.
 

Attachments

  • Layaut03_02.jpg
    Layaut03_02.jpg
    27.1 KB · Views: 2
  • TT_01.jpg
    TT_01.jpg
    52.3 KB · Views: 2
Top