Maker Pro
Maker Pro

difference between............

krawczuk

Mar 20, 2011
10
Joined
Mar 20, 2011
Messages
10
hi, what is the differance between constant current adjustable and adjustable current limit ?

mark k
 

davenn

Moderator
Sep 5, 2009
14,039
Joined
Sep 5, 2009
Messages
14,039
hi Mark

well just off the top of my head I would say...

adjustable constant current --- is a power supply that you can adj the current to a required amount, say 1.5 Amps, and it wont vary from that

adjustable current limit --- is a feature of a power supply where you can adj the maximum supplied current to a required limit, say 2 amps, and the current limiting circuit in the power supply wont let the current go over that amount. BUT the current is able to vary anything from 0A to 2A --- therefore it isnt a constant current source.

Dave
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Let me give you a car analogy.

Constant current is like driving at a constant speed. A current limit is like a speed limit (except more heavily enforced).

We're all used to speed limits. You may not ever travel at the speed limit because of traffic, weather, or personal preference. You have the freedom to travel at any speed up to that limit.

Constant current is like constant speed, but even more so. We never drive with the objective of maintaining a constant speed. Imagine driving along a highway. We might decide to travel at a constant speed (lets say the speed limit), but if there is a traffic jam ahead, we will slow down.

A constant current power supply will always supply that current. It's as if, when finding a traffic jam ahead you just put your foot to the floor and push through it without reducing your speed. In this particular case the constant current power supply will increase the voltage so that it can push harder to maintain the same current.
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Just don't run the constant current supply with no load, it will output infinite voltage :)
 

krawczuk

Mar 20, 2011
10
Joined
Mar 20, 2011
Messages
10
excellent !!!!

hi, thanks for all ya answers !!, exactly what i needed !!!!


mark k
 
Top