Maker Pro
Maker Pro

Different in voltage of 3 phase

Status
Not open for further replies.

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Insufficient information. Please elaborate.
Are these measured voltages or is this a theoretical question?
Are these phase-to-phase voltages or phase-to-neutral?
Are the colors in any way important?
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
If measuring to neutral and there are single phase loads between the phases and neutral then varying 1ph loads will cause unbalance.
M.
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
No wonder this Op has the stutters......"RTYTYBTRYRTY"

If those 400v levels are phase to neutral, what is the phase to phase level (1000V..??)
 

Kiwi

Jan 28, 2013
471
Joined
Jan 28, 2013
Messages
471
As requested, we need more information.

Is this generator or mains supply?

Voltage will be phase to phase, not phase to neutral. Phase to neutral will be about 240v for your system.
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
Voltage will be phase to phase, not phase to neutral. Phase to neutral will be about 240v for your system.

Outside your house and mine as well but anyone's guess what the Op is playing with.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
@RTYTYBTRYRTY : You're firing questions at us without showing that you consider the responses given, less an understanding of 3 phase systems.
Please get informed about the basic operation of three phase systems (here's another link) and if open issues remain, come back with more clear questions.
For the time being I'll close this thread.
 
Status
Not open for further replies.
Top