What is the purpose of the Collector resistors?
J JohnEG Feb 17, 2012 3 Joined Feb 17, 2012 Messages 3 Mar 22, 2012 #1 What is the purpose of the Collector resistors?
Harald Kapp Moderator Moderator Nov 17, 2011 13,700 Joined Nov 17, 2011 Messages 13,700 Mar 22, 2012 #2 Lacking a picture of the circuit you're questioning, I can only assume that you refer to the load resistors which will convert the collector current into a voltage for further processing in later stages of the amplifier. Harald
Lacking a picture of the circuit you're questioning, I can only assume that you refer to the load resistors which will convert the collector current into a voltage for further processing in later stages of the amplifier. Harald
J JohnEG Feb 17, 2012 3 Joined Feb 17, 2012 Messages 3 Mar 22, 2012 #3 http://www.ecircuitcenter.com/circuits/bjt_diffamp1/bjt_diffamp1.htm Specifically RC2
(*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator Jan 21, 2010 25,510 Joined Jan 21, 2010 Messages 25,510 Mar 22, 2012 #4 Redraw the circuit with those resistors removed and replaced with links. What happens differently to the points marked as VC1 and VC2?
Redraw the circuit with those resistors removed and replaced with links. What happens differently to the points marked as VC1 and VC2?
D deepak kumar panda Mar 21, 2012 8 Joined Mar 21, 2012 Messages 8 Mar 23, 2012 #5 Rc1 and Rc2 are nothing but the load for each transistor.if we are taking double ended o/p then we take the o/p 4m both d resistors .
Rc1 and Rc2 are nothing but the load for each transistor.if we are taking double ended o/p then we take the o/p 4m both d resistors .