Maker Pro
Maker Pro

Difficulty finding the appropriate resistor with power calculation

t101

Jul 10, 2022
24
Joined
Jul 10, 2022
Messages
24
What is missing is a schematic showing the power supply voltage and the forward voltages and wiring of the "multiplicity" of LEDs,.
I would have posted this initially.
 

Attachments

  • snap_design.png
    snap_design.png
    58.7 KB · Views: 7

t101

Jul 10, 2022
24
Joined
Jul 10, 2022
Messages
24
Really? Then I strongly suggest you be VERY careful while you work on it!

Because: If the designer of your "setup" was really willing to waste 15V across what's nothing but a heat-producing ballast resistor, then the total supply voltage across resistor plus series LED chain can be expected to total well above 100V, creating an obviously dangerous shock hazard.

Otherwise they're a very poor designer to create such an inefficient circuit, and the "setup" can be expected to be dangerous just from being a lousy design.

Because: If the designer of your "setup" was really willing to waste 15V across what's nothing but a heat-producing ballast resistor,

Then please help me change the voltage to something more appropriate and simple fitting a ballast resistor.
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
bighawk.jpg temp5.GIF
Because: If the designer of your "setup" was really willing to waste 15V across what's nothing but a heat-producing ballast resistor,

Then please help me change the voltage to something more appropriate and simple fitting a ballast resistor.

Why not connect all your LEDs in a single series string and power them all from a single resistor, thus drawing only half the current? Sketch attached.

By the way, the photo is of a beautiful red shouldered hawk that kindly paid me a visit one day outside my office window -- not an owl.
 

Attachments

  • temp5.GIF
    temp5.GIF
    3.9 KB · Views: 2
Last edited:

Audioguru

Sep 24, 2016
3,656
Joined
Sep 24, 2016
Messages
3,656
Guess what? Red LEDs are not 1.23V. Instead they are 1.8V to 2.1V when at about 15mA.
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
Because: If the designer of your "setup" was really willing to waste 15V across what's nothing but a heat-producing ballast resistor,

Then please help me change the voltage to something more appropriate and simple fitting a ballast resistor.

Even more efficient would be a 6V supply.

temp5.GIF
 

t101

Jul 10, 2022
24
Joined
Jul 10, 2022
Messages
24
View attachment 55778 View attachment 55781

Why not connect all your LEDs in a single series string and power them all from a single resistor, thus drawing only half the current? Sketch attached.

By the way, the photo is of a beautiful red shouldered hawk that kindly paid me a visit one day outside my office window -- not an owl.
What a magnificent alpha predator. I had the chance to meet one in Georgia when it dove in and lifted a rabbit off of the road in front of me.

Series would be easier but I need the parallel for setup purposes.
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
What a magnificent alpha predator. I had the chance to meet one in Georgia when it dove in and lifted a rabbit off of the road in front of me.

Series would be easier but I need the parallel for setup purposes.

Then running them from a 5V supply with 180 Ohm resistors would save 2/3rds of the energy and 80% of the wasted heat (assuming equal power supply efficiencies).
 
Last edited:

t101

Jul 10, 2022
24
Joined
Jul 10, 2022
Messages
24
The resistor in that case will be in series with the LED/LEDs so their voltage drop must be subtracted first.
i.e. if you have 2 red LEDs in series with your resistor, you must first subtract 2 x 1.7v (or there abouts) first.
Remainder is the voltage that will appear across the resistor.
If 12v supply, then 12 -(2 x 1.7v = 3.4v) = 8.6v.
You then need to calculate the resistor at 8.6v divided by whatever current through the LEDs (say 20mA)
So resistor is 8.6/0.20 = 430R.
As that is not a standard size, then go to 470R, you won't be able to see the difference.
Then the watage would be 8.6 (v) x 0.02 (A) = 0.172W .....so 1/4w resistor.
Maybe a picture will help. What is the voltage across the resistor? Hint: You'll never know until you measure it with an actual voltmeter.

View attachment 55771
Maybe a picture will help. What is the voltage across the resistor? Hint: You'll never know until you measure it with an actual voltmeter.

View attachment 55771
Even more efficient would be a 6V supply.

View attachment 55783
forum 8-1-22.png
Ok so I've reduced the voltage to 5v and the current being drawn is
33.6 ma. The LEDs are getting sufficient current. What is the max current I should look for given a 5V supply in this circuit? I came across one PS that had 5V with 2000ma obviously too much. What combo of V and current would meet the needs of this circuit while being safe especially?
 
Last edited:

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
View attachment 55786
Ok so I've reduced the voltage to 5v and the current is being drawn is
33.6 ma. The LEDs are getting sufficient current. What is the max current I should look for given a 5V supply? I came across one PS that had 5V with 2000ma.

I don't understand your question about "max current." Sounds like something to consult the LED datasheet about -- not the PS's.
 

t101

Jul 10, 2022
24
Joined
Jul 10, 2022
Messages
24
No, sorry max current of the power supply for this circuit. As you pointed out my 15V 300-400ma PS was seriously flawed. So what instead?

Thanks
 

Audioguru

Sep 24, 2016
3,656
Joined
Sep 24, 2016
Messages
3,656
Nobody needs a low current AC-DC power supply so they are not made and not available.
Years ago some big and heavy 6V/300mA AC-DC power supplies were made expensively with a transformer.
Today millions of 5V/2000mA AC-DC power supplies are made inexpensively for charging a phone. I bought a tiny one
Look here:
 

Attachments

  • LEDs.png
    LEDs.png
    36.6 KB · Views: 2

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
No, sorry max current of the power supply for this circuit. As you pointed out my 15V 300-400ma PS was seriously flawed. So what instead?

Thanks
It was a question of voltage and efficiency. Not current.

>80% of the voltage, and therefore power, of your 15V supply was being wasted in the ballast resistor. By contrast "only" 50% of the power of your 5V PS is going down the drain. You tripled your circuit's efficiency.
 
Top