Maker Pro
Maker Pro

Digital multimeter without Rotary switch.

Status
Not open for further replies.

Prashant S Akerkar

Mar 30, 2018
17
Joined
Mar 30, 2018
Messages
17
Is it feasible to design and construct a DMM with Rotary switch or Dial replaced
functions with Push buttons ?.

Example :

110 V Ac - Push button
230 V Ac - Push button
300 V Ac - Push button


Thanks & Regards,
Prashant S Akerkar
 

Prashant S Akerkar

Mar 30, 2018
17
Joined
Mar 30, 2018
Messages
17
Thanks.

Is it a portable DMM product ?

The Rotary switch is replaced completely
with push buttons.

Thanks & Regards,
Prashant S Akerkar
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Is it feasible to
Prashant, your questions, I've had a look at some of your recent ones, are way too general and lack the detail necessary to give really useful answers.
The answers to many, if not most, of your questions you can find simply by looking what's on the market.

A lot of what you're asking for is feasible.
Is it meaningful? I have my doubts.
Is it realizable at tolerable cost? And what would be your financial limit?
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
The Rotary switch is replaced completely
with push buttons.

pretty pointless and much more difficult to wire and use
just think, if it was a better way to go, push buttons would already be the main way used

time to close another thread
 
Status
Not open for further replies.
Top