Maker Pro
Maker Pro

Discretes in cheap designs (EDN mag)

KrisBlueNZ

Sadly passed away in 2015
Nov 28, 2011
8,393
Joined
Nov 28, 2011
Messages
8,393
Discretes in cheap designs - EDN magazine

Martin Tomasz

"As part of my job at Touchstone Semiconductor, I’ve been doing some teardowns of consumer products recently—and from time to time I’m still finding lots of discretes in the analog portion of those designs. A wireless door chime revealed a single-layer, low-tolerance PCB with a forest of TO-92 transistors, diodes, and resistors. The super-regenerative radio-receiver portion had the usual transistor plus potted coils and caps, but there was a surprising number of discretes as part of the low-frequency analog circuitry, too...."

http://www.edn.com/electronics-blog...97367/Discretes-in-cheap-designs?cid=EDNToday
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,724
Joined
Nov 17, 2011
Messages
13,724
If you can reliaze the function with a handful of discretes and you have cheap workers, why not? It's surely cheaper for those manufacturers, other wise they wouldn't do it this way. As an aside: How long will the highly integrated circuit be supplied? If a simple transistor is discontinued you will probably very easily find a pin compatible substitute.
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Or perhaps they just have an old design and no one capable of updating it.

Bob
 
Top