Hi,
My dishwasher is a Baumatic BWDI631 which runs through the cycle without heating at all. Ive measured the heater element at approx 30ohm so I think that's ok. During the cyle the voltage starts at 2V and goes up to 29V for the main cleaning part of the cycle. This sounds low to me, any help would be appreciated
Thanks
My dishwasher is a Baumatic BWDI631 which runs through the cycle without heating at all. Ive measured the heater element at approx 30ohm so I think that's ok. During the cyle the voltage starts at 2V and goes up to 29V for the main cleaning part of the cycle. This sounds low to me, any help would be appreciated
Thanks