Maker Pro
Maker Pro

dmp 734 module

D

Dave White

Jan 1, 1970
0
just installed a 734 module on DMP XR500N panel.
door has rim strike with a push bar, rte above the door as well as dr
contact.
the instructions say that you can set zone 3 for REX input that will
activate soft shunt, as well as not energize the unlock relay, i can't
figure out to program the module to not energize the lock relay upon REX
activation.
looked at the programming on the Xr500 panel, but can't find any settings
there either.
 
C

Crash Gordon

Jan 1, 1970
0
call tech support they're great...they'll walk you through it.
 

Similar threads

B
Replies
6
Views
3K
Bob La Londe
B
J
Replies
0
Views
1K
Jim Rojas
J
M
Replies
16
Views
1K
Crash Gordon
C
B
Replies
9
Views
1K
Crash Gordon
C
Top