A
[email protected]
- Jan 1, 1970
- 0
i am using an LMC6772A and I need to make sure that the output does
not go out-of-control during startup and go LOW for any length of
time, i.e. while the supply voltage is less than 2.7V, the output
needs to stay high (open drain). the inputs will always be + > -
during startup.
is there some way to figure out if this comparator is intrinsically
designed to be open-drain during startup?
not go out-of-control during startup and go LOW for any length of
time, i.e. while the supply voltage is less than 2.7V, the output
needs to stay high (open drain). the inputs will always be + > -
during startup.
is there some way to figure out if this comparator is intrinsically
designed to be open-drain during startup?