Maker Pro
Maker Pro

Does a 3-phase phase-locked loop diagram possible for an AC to DC battery charger?

Hasan2019

Sep 11, 2019
25
Joined
Sep 11, 2019
Messages
25
Hi there,

In order to achieve unity power factor control, the phase of the AC voltage needs to be obtained. The phase is obtained through a phase-locked loop (PLL).

Take a look for single phase control structure of the PLL ,
ppl_2.JPG


For such similar way I want to mention some of 3-phase equations, could you kindly elaborate it more ?


VSa = 1/3*(VSab-VSca);
VSb = 1/3*(VSbc-VSab);
VSc = 1/3*(VSca-VSbc);

VSalpha = 2/3*(VSa - (0.5*VSb) - (0.5*VSc));
VSbeta = 2/3 *(SQRT3_2*VSb - SQRT3_2*VSc);

VSq = VSalpha*COS_theta + VSbeta*SIN_theta;
VSd = -VSalpha*SIN_theta + VSbeta*COS_theta;

VSd_error = (VSd - VSd_ref);

freq_delta += (Kp_PLL*(VSd_error-AC_FREQ_PERR) + Ki_PLL*VSd_error);

Kp_PLL=0.1

p_VSd_error = VSd_error;

if(freq_delta > 5.) freq_delta = 5.;
if(freq_delta < -5.) freq_delta = -5.;

freq = ((AC_FREQ_NORMAL ? 50 : 60) + freq_delta);

freq_filtered = 0.99*freq_filtered + 0.01*freq;

theta += (PI2*freq_filtered*AC_TSW);
AC_TSW= 0.000033

Lets angle theta goes pi to 2*pi.
 
Top