Maker Pro
Maker Pro

Does this Schematic look right? (Firing Electronic Matches)

funman1

Aug 15, 2010
55
Joined
Aug 15, 2010
Messages
55
No problem :)
I'm so greatful for the FREE advice and help, I have NO issues waiting!

Thanks again :)
 

NickS

Apr 6, 2010
367
Joined
Apr 6, 2010
Messages
367
I see no functional issue with your via placements.

As for the plane connect, the relief connect is generally a good idea for all hand soldered boards. Otherwise it becomes very difficult to work with because you have a lot more thermal mass. The exception would be RF boards where solid grounding can be the difference maker in meeting spec.
 

funman1

Aug 15, 2010
55
Joined
Aug 15, 2010
Messages
55
ok perfect I didn't know if it was bad to just touch the SMT pad to the Via instead of running a trace wire.

And i will keep all as thermal pads even if there's no solder going there..
Thanks again!

I will order this today, and should see it perhaps as early as next week :)
 

funman1

Aug 15, 2010
55
Joined
Aug 15, 2010
Messages
55
Boards are HERE!
Here is a scan of them on the flat bed scanner

finishedboard1.jpg


finishedboard2.jpg


box1.jpg


box2.jpg
 
Top