Maker Pro
Maker Pro

DPDT Switch for Potentiometer/OptoCoupler

Gswanson74

Jan 21, 2020
2
Joined
Jan 21, 2020
Messages
2
I have a meanwell driver with 3 in 1 dimming. I want to be able to adjust dimming both manually via potentiometer (This is the way it is set up now) and via an Arduino. If I ran the dimmer leads to the DPDT switch and the potentiometer off leg one and the OptoCoupler off leg two, this should allow switching, correct? Anything to watch out for? Thanks in advance!
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
Would be helpful to at least include a drawing of your circuit.
Not Fritzing.
Any code and details of drivers used for future reference as well.
 
Top