Maker Pro
Maker Pro

draw a constant current from a lead acid battery

gsrilanka

Jan 27, 2015
7
Joined
Jan 27, 2015
Messages
7
I supposed to draw a constant current from a lead acid 12v car battery.
i need a help to implement a circuit for that.
 

Attachments

  • Capture.JPG
    Capture.JPG
    51.2 KB · Views: 167

KUMARA SHP

Aug 1, 2014
122
Joined
Aug 1, 2014
Messages
122
02512x01.png

may be this one help you rather than your circuit.
in your circuit load is the transistor.
so when it is biased definitely it will go into saturation region,
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
I supposed to draw a constant current from a lead acid 12v car battery.
i need a help to implement a circuit for that.

that circuit of yours isn't going to work, its just going to short circuit the 12V battery and the transistor
when current is applied to the base of the transistor to put it into conduction
 

HANKMARS

Jul 28, 2019
498
Joined
Jul 28, 2019
Messages
498
If this is an assignment then this may not help but I have found off-the-shelf constant current sources mostly reliable and quite time saving. Also I often use the net with a call similar to, "Images constant current source. " Many images are inaccurate and not much more than a block diagram but quality designs can be found.
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
If this is an assignment then this may not help but I have found off-the-shelf constant current sources mostly reliable and quite time saving. Also I often use the net with a call similar to, "Images constant current source. " Many images are inaccurate and not much more than a block diagram but quality designs can be found.

Look up....check the date....... almost 7 years old. :rolleyes:
 
Top