I was desoldering while tired and ripped a solder pad right off of a board. So, I was looking at how to repair the board and I came across a youtube video where they use a dry film adhesive. I was hoping one of you could tell me what this product actually is that the tech is using to affix the pad to the board.
If you don't know what this stuff is, could you please recommend a different product for reattaching the pad to the board. It is a small rectangular pad that a 20-pin IC would be soldered to.
Thanks in advance,
Ben
If you don't know what this stuff is, could you please recommend a different product for reattaching the pad to the board. It is a small rectangular pad that a 20-pin IC would be soldered to.
Thanks in advance,
Ben