Maker Pro
Maker Pro

Dt 9205 DMM problem

Lakshman

Jul 2, 2022
4
Joined
Jul 2, 2022
Messages
4
My 9205 is almost new. Never used it the wrong way. It has started showing several decimal points When it displays 2 decimal points the digital value is correct if I ignore one decimal point. However, sometimes it displays even three decimal points with entirely wrong readings. I have several better DMMs but am still curious to the reason for this defect. Could you please help me,guys ?
 

Bluejets

Oct 5, 2014
5,714
Joined
Oct 5, 2014
Messages
5,714
Sounds like it has been dropped and the display is now out of wack (alignment) or even broken the display glass.
 

Lakshman

Jul 2, 2022
4
Joined
Jul 2, 2022
Messages
4
Thank you very much for taking your valuable time on me but I was the only person who used it even occasionally Others have no access to my workshop
I am sure it was not dropped and I wonder why this problem suddenly developed.
The display appears to be perfect no cracks or any visible signs of damage. Thanks anyway for your kindness,sir.
 

Lakshman

Jul 2, 2022
4
Joined
Jul 2, 2022
Messages
4
Here with,I am sending you the photos of the defective DMM ,sir.The DC voltage measurment shown was taken with the same DMM when the accurate votage was 12.3 V .Thanks !
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,518
Joined
Nov 17, 2011
Messages
12,518
No photos.
File size shall be < 300 kB for upload.
 
Top