Maker Pro
Maker Pro

Dummy needs help!

CIRCUIT BREAKER

Sep 19, 2015
5
Joined
Sep 19, 2015
Messages
5
I bought a new AP camera SRICAM ID: MEYE-201988-EACEA wireless. The instructions say to plug the camera into your router,program and then unplug. This is my problem, I am using a Netgear MIFI router which has no ports to plug in anything. Can anyone help? Need detailed help. You don't have to call me dumb, I already know it ! Thanks in advance.
Wayne
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
maybe you can just plug it into the Ethernet port for the purpose of programming it
I assume you PC has an Ethernet port ... haven't seen one that doesn't and I assume that is
where your router is currently connected to. Unplug the router and plug in the camera do the programming
then unplug and do what ever else to set it up


Dave
 

CIRCUIT BREAKER

Sep 19, 2015
5
Joined
Sep 19, 2015
Messages
5
Dave thanks for the reply. The problem is the router has no ports and in no way cables to the computer. The camera has to be programed to the router this is the problem. I am not sure if I can program with the computer.
Wayne
 
Top