Maker Pro
Maker Pro

DVR 620 Ejects tape and powers off

Pistol803

Feb 21, 2018
1
Joined
Feb 21, 2018
Messages
1
This is a Toshiba DVR 620. Emmediately after putting in VHS tape it powers off and ejects the tape. How can I stop this from happening?
 

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
I will say that some will fault if the mechanism is overloaded (binding) or if a belt is slipping. It's very likely your belts are worn out due to age.
 

CTP4500

Mar 3, 2018
21
Joined
Mar 3, 2018
Messages
21
The laser is reading a damaged tape. Clean it with an air blower. Then try it again. ok not. It shuts off because the circuits cannot read the tape. Constant power is not used. Timer to this device. lever is broken. a lock is loose, cannot lock. Check the power supply.
 
Top