Maker Pro
Maker Pro

Efficient video TX?

  • Thread starter Daniel Kelly \(AKA Jack\)
  • Start date
D

Daniel Kelly \(AKA Jack\)

Jan 1, 1970
0
Hi guys,

From your vast collective knowledge, please could you recommend a video
transmitter with the following characteristics:

* very low power consumption (<70mA), ideally running at below 7.4volts
* small size
* transmits mono audio and colour video
* transmits outside the spectrum used by WiFi (802.11b/g uses 2401-2483
MHz). In practice I guess this means the video tx must use either 800Mhz,
1400Mhz, 2300Mhz or 5800Mhz. It must be legal for use in the UK. What I'm
after is a video TX that uses a "quiet" part of the spectrum. 2.4GHz
certainly aint quiet (wifi, digital cordless phones, microwaves, AV
transmission)!
* available in the UK
* costs less than 150 UK pounds
* comes with a compatible RX which also has very low power consumption.

Many thanks for your help,
Jack
 
D

Daniel Kelly \(AKA Jack\)

Jan 1, 1970
0
I only need to transmit about 20meters.

Jack
 
Top