Maker Pro
Maker Pro

Electro magnet, camera flash or induction, need help please..

Brinamo

Jun 3, 2024
1
Joined
Jun 3, 2024
Messages
1
Hello,
I do not have much knowledge in the electronics field :-( Need a big help with a project im trying to put together.
Have succeeded, with another project, just a home made coil and 2*9v batteries, through a 433mhz receiver, works fine for that.
But needing something a lot stronger.
Was thinking using a flash cap from a disposable camera. Then reading some more, to use an induction magnet.
Give a short burst of energy.
All i have is 20swg motor wire. What i am after, the workings to fit into a small box, hidden, then propel something weighing 2 gram, 5-10" Via a ref receiver.
Any help be greatly appreciated..
 

Bluejets

Oct 5, 2014
7,093
Joined
Oct 5, 2014
Messages
7,093
Draw a diagram.
If it resembles any kind or weapon, no further assistance will be forthcoming.
 

bertus

Moderator
Nov 8, 2019
3,392
Joined
Nov 8, 2019
Messages
3,392
Hello,

What i am after, the workings to fit into a small box, hidden, then propel something weighing 2 gram, 5-10"
It sounds like a coilgun.
You will not get support for that over here.

Bertus
 
Top