Maker Pro
Maker Pro

Electrolux tumble dryer with F19 or F12 error codes.

zio_mangrovia

Aug 30, 2015
19
Joined
Aug 30, 2015
Messages
19
My Whirlpool Electrolux tumble dryer, HSCX 90430, stops with F19 or F12 warning and I cannot to decode this error codes. Can you give me support please?
 

PETERDECO

Dec 19, 2019
239
Joined
Dec 19, 2019
Messages
239
From the manual:

F10 to F24
Failure of a component
Switch off and unplug the dryer
.
Wait for about half an hour
.
Plug in the dryer and start the
programme again
.
If the failure persists, call the
After-Sales Service
.
 

Martaine2005

May 12, 2015
4,343
Joined
May 12, 2015
Messages
4,343
Does the dryer stop and never start again?
Or does it always start and then stop with the error?.
Do you hear a low volume beep after it stops?.

Martin
 

zio_mangrovia

Aug 30, 2015
19
Joined
Aug 30, 2015
Messages
19
Does the dryer stop and never start again?
Or does it always start and then stop with the error?.
Do you hear a low volume beep after it stops?.

Martin

Dryer starts and after several minutes stops with code error, F12 or F19.
I cannot listen to beep because dryer is outside and sometimes It stops after 1 hour.
 

Martaine2005

May 12, 2015
4,343
Joined
May 12, 2015
Messages
4,343
My first checks would be for fluff build up on the filter.
I had several that stopped because of a tiny bit of fluff. I left the filter off and they ran fine.
Check that first.

Martin
 
Top