Maker Pro
Maker Pro

Electronic components suppliers in Sydney Northern suburbs

C

Clifford Heath

Jan 1, 1970
0
I've just moved from Melbourne, where I knew a number of good local suppliers,
to Roseville (near Chatswood) in Sydney's north, and I'm stumped for suppliers.
This has to be wrong, isn't Chatswood a major technology hub?

There's Jaycar in Greenwich, that's the best I've found. Altronics is down in
Auburn on Parramatta Rd, WES in Liverpool Rd Ashfield, DSE doesn't count (hasn't
for years). RS, if you wanted to walk in, is out west too.

What others are there that I don't have to cross town to visit?

First off, I need a new soldering iron to replace the Weller whose 24V element
has gone open. I'd prefer one with digital control and readout this time. Fine
tips (and likelihood of long-term availability) for SMD work. Recommendations?

Don't need much in the way of components yet, but an etch tank and an assortment
of RF chip inductors is on the cards.

Clifford Heath.
 
F

F Murtz

Jan 1, 1970
0
Clifford said:
I've just moved from Melbourne, where I knew a number of good local
suppliers,
to Roseville (near Chatswood) in Sydney's north, and I'm stumped for
suppliers.
This has to be wrong, isn't Chatswood a major technology hub?

There's Jaycar in Greenwich, that's the best I've found. Altronics is
down in
Auburn on Parramatta Rd, WES in Liverpool Rd Ashfield, DSE doesn't count
(hasn't
for years). RS, if you wanted to walk in, is out west too.

What others are there that I don't have to cross town to visit?

First off, I need a new soldering iron to replace the Weller whose 24V
element
has gone open. I'd prefer one with digital control and readout this
time. Fine
tips (and likelihood of long-term availability) for SMD work.
Recommendations?

Don't need much in the way of components yet, but an etch tank and an
assortment
of RF chip inductors is on the cards.

Clifford Heath.


You have just about named them all.
 
P

Phil Allison

Jan 1, 1970
0
"Clifford Heath"
<
I've just moved from Melbourne, where I knew a number of good local
suppliers,
to Roseville (near Chatswood) in Sydney's north, and I'm stumped for
suppliers.
This has to be wrong, isn't Chatswood a major technology hub?

** ROTFL !!

Wot a poon.

There's Jaycar in Greenwich, that's the best I've found. Altronics is down
in
Auburn on Parramatta Rd, WES in Liverpool Rd Ashfield, DSE doesn't count
(hasn't
for years). RS, if you wanted to walk in, is out west too.

What others are there that I don't have to cross town to visit?


** Component grocery stores are a thing of the past - dickhead.

RS and Farnell / Element 14 wiped them all out.


First off, I need a new soldering iron to replace the Weller whose 24V
element
has gone open. I'd prefer one with digital control and readout this time.
Fine
tips (and likelihood of long-term availability) for SMD work.
Recommendations?

** Hakko.

Don't need much in the way of components yet, but an etch tank and an
assortment
of RF chip inductors is on the cards.

** Element 14.

Wot a retarded, bloody dinosaur.



.... Phil
 
C

Clifford Heath

Jan 1, 1970
0
** ROTFL !!

It will be interesting if I now get the opportunity to meet the man behind your unhinged persona.
I'll know right away if they match, because your nose must surely have been broken a hundred times.
But I suspect you're quite different in the flesh.

I had decided on Hakko too - the FX888 looks reasonable - because WES has plenty of spares available.
The ability to duck in to a local store to get something extra is important when trying to fit a hobby
into a busy career. But you wouldn't know about that, would you Phil?

Clifford Heath.
 
E

el Presidenti

Jan 1, 1970
0
Clifford Heath said:
It will be interesting if I now get the opportunity to meet the man behind
your unhinged persona.
I'll know right away if they match, because your nose must surely have
been broken a hundred times.
But I suspect you're quite different in the flesh.

I had decided on Hakko too - the FX888 looks reasonable - because WES has
plenty of spares available.
The ability to duck in to a local store to get something extra is
important when trying to fit a hobby
into a busy career. But you wouldn't know about that, would you Phil?

Clifford Heath.

Clifford, don't take what this low-life retarded tird rate toaster repairer
says to heart. It's typical of the coward that he is - hides behind a
keyboard with a big mouth. In person you will find he's a cowering
meak-and-mild guttless fool that sits and fiddles with his dick all day, His
comments and voice are to be likend to a lost fart in a thunderstorm.
 
F

F Murtz

Jan 1, 1970
0
el said:
Clifford, don't take what this low-life retarded tird rate toaster repairer
says to heart. It's typical of the coward that he is - hides behind a
keyboard with a big mouth. In person you will find he's a cowering
meak-and-mild guttless fool that sits and fiddles with his dick all day, His
comments and voice are to be likend to a lost fart in a thunderstorm.


Phill is not a dill, and if you ignore his vituperative comments and he
deigns to comment sensibly he can be quite helpful.
 
F

F Murtz

Jan 1, 1970
0
Dennis said:
I admire your positive thinking however misplaced it may be! :)
If you look at his answers on other technical groups over the years, you
may change your mind.
 
S

swanny

Jan 1, 1970
0
I've just moved from Melbourne, where I knew a number of good local
suppliers,
to Roseville (near Chatswood) in Sydney's north, and I'm stumped for
suppliers.
This has to be wrong, isn't Chatswood a major technology hub?

No, Chatswood is not a major technology hub.
Corner-shop component suppliers are pretty much extinct in Sydney.
 
K

keithr

Jan 1, 1970
0
No, Chatswood is not a major technology hub.
Corner-shop component suppliers are pretty much extinct in Sydney.

Chatswood used to be a hub of the IT industry, that has largely moved to
North Ryde these days.
 
Y

Yaputya

Jan 1, 1970
0
F Murtz said:
Phill is not a dill, and if you ignore his vituperative comments and he deigns to comment sensibly he can be quite helpful.

Along the lines of Hannibal Lecter, eh ???
 
Top