Electronic work bench freeware 9 Printing problem

[[email protected]]

I am uisng Electronic work bench freeware 9, but when I print file, I
donot get good prints, i.e for eg. the pcb tracks are not sharp enough,
I am using adobe acrobat o print to PDF files.

 

[Stuart Brorson]

[email protected] wrote:
: I am uisng Electronic work bench freeware 9, but when I print file, I
: donot get good prints, i.e for eg. the pcb tracks are not sharp enough,
: I am using adobe acrobat o print to PDF files.

If you want a quality design package for free, use gEDA on Linux.

Stuart

 

[Eeyore]

I am uisng Electronic work bench freeware 9, but when I print file, I
donot get good prints, i.e for eg. the pcb tracks are not sharp enough,
I am using adobe acrobat o print to PDF files.

I doubt that *printing* was ever intended to produce decent artwork for pcbs !

You may want to look at the options in Acrobat btw.

Graham

 

[[email protected]]

Hi,
I had tried to print in different dpi 9330 dpi, 600dpietc.) but I
didn't get a decent PCB artwork. I had an old version of Ultiboard (ver
5), it has no problem in printing, so I think the problem is in EWB.

 

[invester_wanted]

try using ageneric printer driver based on the type you have.

eg. generic laser
or generic deskjet