Maker Pro
Maker Pro

Elenco EK-12A Strobe Light Kit schematic

AnalogKid

Jun 10, 2015
2,913
Joined
Jun 10, 2015
Messages
2,913
I have several pieces of an old Elenco strobe light kit. The PC board is marked:

EK-12A

Online searching indicates that the kit part number might be K-12A, K12, K12A, etc.

The pc board has reference designators (!!!), but I have no schematic, BOM, or anything else that assigns component values to the part references. Based on other strobe circuits, my guess is that the operating voltage is in the 4.5 V - 12 V range, but I have no data on that, either. I contacted Elenco over a week ago; no response yet.

Appreciate any help.

ak
 

Delta Prime

Jul 29, 2020
2,033
Joined
Jul 29, 2020
Messages
2,033
sorry kid all I got is a cartoon for you .
K-12A solder kit. It comes with instructions but I can't find a schematic. Given the few components perhaps this cartoon is accurate. I have to get back to my cartoon. Sooo...
Shh. Be vewy, vewy quiet. I'm hunting wabbits.
1680424315655.jpg
 

bertus

Moderator
Nov 8, 2019
3,348
Joined
Nov 8, 2019
Messages
3,348
Hello,

Does the attached PDF help?

Bertus
 

Attachments

  • Elenco k-12a.pdf
    754.1 KB · Views: 2
Top