Maker Pro
Maker Pro

Elliptic vs Elliptical Filter

K

Kral

Jan 1, 1970
0
Hi
This post is admittedly a little nit-picky, but there seems to be some disagreement over the correct alternate terminology of Cauer filters. Most texts refer to “Elliptic” filters. However, the term “Elliptical” filter is also used. In my opinion, “elliptic” is the correct terminology, since the pole locations are determined by solution of elliptic functions, whose periods are determined by solution of Jacobi elliptic integrals. Opinions are welcome.
 
Hi

This post is admittedly a little nit-picky, but there seems to be some disagreement over the correct alternate terminology of Cauer filters. Most texts refer to “Elliptic” filters. However, the term “Elliptical” filter is also used. In my opinion, “elliptic” is the correct terminology, since the pole locations are determined by solution of elliptic functions, whose periods are determined by solution of Jacobi elliptic integrals. Opinions are welcome.

My dominatrix says "get away from that computer screen and take out the garbage." The directrix is strangely silent. After that slap upside the ear hole, it's difficult to maintain focus.
Jon Lark
 
N

Nico Coesel

Jan 1, 1970
0
Kral said:
Hi
This post is admittedly a little nit-picky, but there seems to be some disa=
greement over the correct alternate terminology of Cauer filters. Most tex=
ts refer to =93Elliptic=94 filters. However, the term =93Elliptical=94 fil=
ter is also used. In my opinion, =93elliptic=94 is the correct terminology=
, since the pole locations are determined by solution of elliptic functions=
, whose periods are determined by solution of Jacobi elliptic integrals. O=
pinions are welcome.

IMHO this is just another dyslexical discussion.
 
J

josephkk

Jan 1, 1970
0
Hi
This post is admittedly a little nit-picky, but there seems to be some disagreement over the correct alternate terminology of Cauer filters. Most texts refer to “Elliptic” filters. However, the term “Elliptical” filter is also used. In my opinion, “elliptic” is the correct terminology, since the pole locations are determined by solution of elliptic functions, whose periods are determined by solution of Jacobi elliptic integrals. Opinions are welcome.

This is the kind of (pseudo)issue that keeps idiots employed. Use what
you think best and to the devil with rest.

?-)
 
J

josephkk

Jan 1, 1970
0
Except if you build it inside a rugby ball, in which case it would be an
ellipsoidal filter. Maintain focus, and ask your directrix. ;)

Cheers

Phil Hobbs


KHKHKHKHKHKHK.

?-)
 
J

josephkk

Jan 1, 1970
0
IMHO this is just another dyslexical discussion.


Very much so, but it inherits from really crappy ESL instruction that does
not make points about exceptions stated in the codified rules; such as
"dynamical" instead of the correct "dynamic". Common even in academic
papers since at least the 1940s. "Lolly, lolly, lolly get your adverbs
here" class pre-school early grade school over generalization.

Yes, it is a pet peeve. I only have a dozen or so.

?-)
 
B

benj

Jan 1, 1970
0
This is the kind of (pseudo)issue that keeps idiots employed. Use what
you think best and to the devil with rest.

This is the kind of opinion that keeps everyone dumbed-down. This goes
right along with the "theory" of education where kids get to make up
their own spelling of words. Don't want to hurt their self-of-steam!

Elliptic is correct for the reasons stated. Sheesh. World goes to hell in
hand basket!

Why is it that the dumbest clowns always call everyone else an idiot?
 
J

josephkk

Jan 1, 1970
0
This is the kind of opinion that keeps everyone dumbed-down. This goes
right along with the "theory" of education where kids get to make up
their own spelling of words. Don't want to hurt their self-of-steam!

Elliptic is correct for the reasons stated. Sheesh. World goes to hell in
hand basket!

Why is it that the dumbest clowns always call everyone else an idiot?
Are you a dynamical doofus?

?-)
 
S

Simon S Aysdie

Jan 1, 1970
0
Hi
This post is admittedly a little nit-picky, but there seems to be some disagreement over the correct alternate terminology of Cauer filters.  Mosttexts refer to “Elliptic” filters.  However, the term “Elliptical” filter is also used.  In my opinion, “elliptic” is the correct terminology, since the pole locations are determined by solution of elliptic functions, whose periods are determined by solution of Jacobi elliptic integrals.  Opinions are welcome.

It is elliptic, for sure.
 
Top