Maker Pro
Maker Pro

EMC issue with single board computer

M

Mike Warren

Jan 1, 1970
0
PeteS said:
That said, I would expect it to ease the situation, of course. My
suggestion of the cap is only because I have seen it help, even where
one might think there should be no effect. Indeed, a zero ohm link may
help the situation sufficiently to cure the problem. If not, it's
something to try that may or may not help and won't take long to test.

I tried shorting the ferrite bead but there was no change.

-Mike
 
M

Mike Warren

Jan 1, 1970
0
John said:
In message
<44e79d21$0$494$61c65585@uq-127creek-reader-03.brisbane.pipenetworks.c
om. au>, dated Sat, 19 Aug 2006, Mike Warren


You should have de-selected 'hiking mode'.

This was 10 years ago. It probably went the wrong way around the world
and since it had to drag a hefty 3MB attachment I guess it had to stop
often for rests. :)

-Mike
 
Top