Maker Pro
Maker Pro

ENERGY MEASURE WITH AN OSILOSCOPE

TurgayAbay

Oct 25, 2023
4
Joined
Oct 25, 2023
Messages
4
Hello friends. I almost became sure that we can measure of a Electrical wawe pulse''s spent energy with multiply Voltage and Current and take the result's integral with Osiloscope MATH function . I am working for a special experiment shown at picture. In the experiment we are giving DC current for a very short time (about 100-200 ms) and measuring 1- How much energy TOTAL spent ? 2-How much energy spent for COIL HEAT LOSSES? ( COIL'S resistance is 1 ohm ) For second question i multiplied current x current and i accepted the result wawe as a power wave again like first question's answer (because R=1 ohm and I x I = I x I x 1(R) = I.V) then i took the integral with scope again for energy measuring 1-..DO YOU SEE ANY MISTAKE about circuit or measuring way ? 2- Have you got easier way to measure these?
 

Attachments

  • 1697832849611_bjboxm_2_0.jpg
    1697832849611_bjboxm_2_0.jpg
    278.7 KB · Views: 3

Delta Prime

Jul 29, 2020
1,793
Joined
Jul 29, 2020
Messages
1,793
Kudos to you! You're very observant!
Although the link submitted below indicates current spikes the principle is the same! A very elegant solution has been given by a fellow member of this site.
Screenshot_20231025_123749.jpg

 

TurgayAbay

Oct 25, 2023
4
Joined
Oct 25, 2023
Messages
4
The formed waves are here .Blue is for Voltage and Yellow is for current
 

Attachments

  • Screenshot_20231020-121819_Video Player.jpg
    Screenshot_20231020-121819_Video Player.jpg
    153.3 KB · Views: 0

TurgayAbay

Oct 25, 2023
4
Joined
Oct 25, 2023
Messages
4
Kudos to you! You're very observant!
Although the link submitted below indicates current spikes the principle is the same! A very elegant solution has been given by a fellow member of this site.
View attachment 61203

Thanks for giving details.Yes it is generally similar but the circuit is different. Also i am especially asking for coil heat losses and how can we meausure it with scope
 
Top