Maker Pro
Maker Pro

ESC and Motor using Variable Power supply

Dave Benemerito

Sep 26, 2015
24
Joined
Sep 26, 2015
Messages
24
Hello everyone,
I am planning to create my prototype of my AVR based drone. I'm first going to use two motors and ESC's on a balance platform to test the PID. I would like to ask if I can power the Motors, ESC's and the electronics with a variable power supply?
Thanks! :)
 

Audioguru

Sep 24, 2016
3,650
Joined
Sep 24, 2016
Messages
3,650
An ESC that has a 30A rating when it is powered from 30V will cause a 30V, 5A power supply to curl up and die or blow a fuse or burn out.
 
Top