Maker Pro
Maker Pro

find current source voltage using mesh analysis

tss19

Jun 16, 2013
2
Joined
Jun 16, 2013
Messages
2
I need to find the voltage across the current source. I am only allowed to use mesh analysis. What I did is to found all the mesh currents however that does not help on its own.
 

Attachments

  • mesh.jpg
    mesh.jpg
    61.5 KB · Views: 165

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
If you have the mesh currents then you should be able to determine the voltage across the resistors. From that, the voltage across the current source should be trivially obtained I would have thought.
 
Top