Maker Pro
Maker Pro

Finding a piece like this?

TheStrangeHippo

Apr 25, 2018
1
Joined
Apr 25, 2018
Messages
1
Hello,

I am looking for a screen very very similar to this one, I like the look of it and the size. The parallel lcds and segmented displays on most websites are very small or just look awful (the text in them) They are typically very boxy. I need something wide, like shown.

Note: I am not looking for the housing, just the screen that doesn't look terrible and that you can't see the other segments when they are not on.

arri---udm-display-unit.jpg


Do you guys have any ideas?

thanks

TSH
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Or look on eevblog. Dave's had a few videos recently on designing your own LCD panel.
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
And be aware, you will need a display driver IC or microcontroller with built in LCD display driver to run these things. They bring out each segment, and you need an alternating voltage to drive each one. Not nearly as easy to use as LED displays. If power is not a problem, you are probably better off looking for an LED display.

Bob
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Or, if you are going to use this in a microcontroller or microprocessor based device, use a full color graphics display and have all the flexibility you want.

Bob
 
Top