Maker Pro
Maker Pro

Fluke 87 LCD display stucked in auto test

  • Thread starter Valdemir Santos
  • Start date
V

Valdemir Santos

Jan 1, 1970
0
Hi,
My Fluke 87 multimeter is stucked in LCD auto test mode.
I turn on multimeter, and all segments stays on.
Is there any way to fix this ?
Thanks
 
F

Fred Abse

Jan 1, 1970
0
Hi,
My Fluke 87 multimeter is stucked in LCD auto test mode. I turn on
multimeter, and all segments stays on. Is there any way to fix this ?
Thanks

That's what happens when you switch on with the "AutoHold" button pressed.
Check for stuck buttons. It can easily happen if you've had the case off.
 
R

Robert Baer

Jan 1, 1970
0
Valdemir said:
Hi,
My Fluke 87 multimeter is stucked in LCD auto test mode.
I turn on multimeter, and all segments stays on.
Is there any way to fix this ?
Thanks
Term is "stuckacated", not "stucked".
 
S

Shaun

Jan 1, 1970
0
"Valdemir Santos" wrote in message

Hi,
My Fluke 87 multimeter is stucked in LCD auto test mode.
I turn on multimeter, and all segments stays on.
Is there any way to fix this ?
Thanks


I would recommend some percussive maintenance for the meter. Throw it onto
the floor, that should fix it.
 
V

Valdemir Santos

Jan 1, 1970
0
"Valdemir Santos" wrote in message




Hi,

My Fluke 87 multimeter is stucked in LCD auto test mode.

I turn on multimeter, and all segments stays on.

Is there any way to fix this ?

Thanks





I would recommend some percussive maintenance for the meter. Throw it onto

the floor, that should fix it.


I changed 9v battery, and it´s working fine again.
Fluke 87 is unbreakable !
Thanks
 
Top