Maker Pro
Maker Pro

flyback transformer pins

H

hello

Jan 1, 1970
0
Hi,

Does anyone know information on the pins around the horseshoe shaped ring on
the bottom of a flyback transformer? What pins are primary, etc...

Thanks,

Greg
 
S

Sam Goldwasser

Jan 1, 1970
0
hello said:
Does anyone know information on the pins around the horseshoe shaped ring on
the bottom of a flyback transformer? What pins are primary, etc...

There is no standard. Only way to know for sure is to get the specs
for the particular model flyback.

You can determine a lot with an ohmmeter though. See the Flyback Testing
FAQ at the site below.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header is ignored.
To contact me, please use the feedback form on the S.E.R FAQ Web sites.
 
Top