Forum Upgrade & Merging with Maker.pro

[Bluejets]

difficult to follow...don't know why you have to muck around with something that works just for the sake of making it different.
Have to log in every time and then find the active discussions.
I say leave it the way it was.

 

[Bluejets]

Maker.pro crap too...

 

[Martaine2005]

Maker.pro crap too...

I think this is officially the end of ElectronicsPoint. RIP EP.

 

[Minder]

difficult to follow...don't know why you have to muck around with something that works just for the sake of making it different.
Have to log in every time and then find the active discussions.
I say leave it the way it was.

If its right, We can always change it!

 

[Harald Kapp]

I also miss the possibility to add a personal message when cleaning SPAM. The previous method with a predefined message that could be altered was imho better.

 

[Alec_t]

If its right, We can always change it!

Seems to be the philosophy of a well-known OS producer too.

 

[Minder]

Seems to be the philosophy of a well-known OS producer too.

I'll second that!!

 

[Audioguru]

I have had Electronics Point in my forums group for years on my Windows 10 system, now it has changed into Maker Pro.
I tried to change the Internet Shortcut from Electronics Point to Maker Pro but that does not work.

I deleted the Electronics Point internet shortcut now how do I make a new maker Pro shortcut??

 

[Minder]

I use https://maker.pro/forums/whats-new/posts

 

[Harald Kapp]

Where's the button to move single posts from one thread to another (incl. a new one)?

 

[Alec_t]

Could we please have a higher colour contrast between the buttons for the previous/current/next displayed page?

On some screens, or in poor light, or for members with less than perfect eyesight, the present buttons are virtually indistinguishable.

 

[Harald Kapp]

Where's the button to move single posts

Found it: at the bottom of the page after marking the posts a pop-up appears.

 

[Sidecar Bob]

It looks like the Project Logs section is missing. I can find the button (click Forums and mouse over Community) but when I click it the page says "Oops! We ran into some problems." and "You do not have permission to view this page or perform this action. "
I see the same thing when I click on a shortcut to one of my Project Logs on my computer too.

 

[Harald Kapp]

It looks like the Project Logs section is missing.

Do you mean this section: https://maker.pro/forums/forums/project-log-discussion.172/
It works for me.

 

[Harald Kapp]

There seems to be an issue with handling the Dollar sign. Se this thread: https://maker.pro/forums/threads/desparately-seeking-off-button.297503/


In edit mode the entry looks correct like this:

Closer inspection shows that the "[imath]" seems to be replaced by an [imath] and [/imath]token, leading to the interpretation of the text in between as an equation. I tried to change these tokens back to "[/imath]" and remove all formatting from the post - doesn't work

Closer inspection shows that the "$" seems to be replaced by a [math] and [/imath] token, leading to the interpretation of the text in between as an equation. I tried to change these tokens back to "$" and remove all formatting from the post - doesn't work .
using the [PLAIN] and [/PLAIN] tokens is not a viable solution.

 

[Harald Kapp]

See, it happens in my own post, too.

 

[davenn]

See, it happens in my own post, too.

I see the $ signs in your post

 

[Harald Kapp]

This is how it look here:
Windows 10, Chrome

Edit: Same with Edge browser.

 

[Alec_t]

Let's see if it works in the UK with Win10 and Firefox.
The following text should read as 10 dollars, 20 dollars :- [imath]10,[/imath]20.
Edit: Nope, didn't work, but in Preview mode it looked ok.

 

[bertus]

Hello,

@eerob
As shown by other members, the parsing of the dollar sign seems to go wrong.
Could you have a look at the issue?

Bertus